Serv-A-Pure 844, SAP-844-CARB, Industrial Carbon Tank, 8" x 44", 1.0 Cu. Ft.
Description and Use
Serv-A-Pure's deionization tanks remove all total dissolved solids from the water fed to the DI tank. The water produced by Serv-A-Pures DI tanks are an excellent use for a spot-free car and RV wash, window cleaning, humidifcation units, laboratory glass washing and general DI water usage.
- Comes pre-filled with MasterCarb Bituminous Acid Washed Carbon, 1 Cubic Foot, 12 x 40 Mesh
- Helps to reduce Chlorine, Organics, and TOC Levels
Capacities
Activated Carbon tanks should be replaced between every 6-12 months, and should not exceed 365 days after being installed, regardless of usage.
Specifications:
- Tank Size: 8" x 44"
- Volume: 1.0 cubic foot
- Tank Head: Clack C1190
- In/Out Size: Clack CL07S-PVC 3/4" NPT Fittings (other Clack tail pieces can be purchased separatley to get you a different connection size)
- Media Used: Bituminous Acid Washed Carbon, MasterCarb, 1 Cubic Foot, 12 x 40 Mesh
- Weight: 94 Pounds
Capacities
Activated Carbon tanks should be replaced between every 6-12 months, and should not exceed 365 days after being installed, regardless of usage.
Operating Conditions
- Service Flow Rate: Up to 5.0 GPM
- Max Pressure: 125 PSI
- Max Temperature: 120°F
- pH Range: 1 to 14
- Wetted Materials
- Liner: Polyethylene
- Head: Polypropylene
- Fittings: Polypropylene
- O-Rings: Buna-N
- Drop Pipe: ABS
Typical Uses
- Chlorine Reduction
- Organic Reduction
- TOC Reduction
Typical Connection Options
- Serv-A-Pure Industrial Tanks come with the Clack C1190 head along with the CL07S-PVC straight 3/4" MPT fittings. There are many other Clack tail piece options that would work with this tank/head combination. Here are some other options you could add to your order if you prefer a different connection type:
- 3/4" x 1" PVC Solvent Elbow: CL0710-PVC
- 3/4" John Guest Elbow: CL07-JG
- 3/4" FPT Elbow: WP90-GHT
- 1" MPT Elbow: CL10-PVC