Pura 15610211 UVB1 EPCB UV System, 2 GPM, 220 VAC with 0.5 Micron Filter
Aqua Flo product's patented UVB series is designed to provide disinfected water at a flow rate of 2 gallons per minute. In addition to the UV disinfection, the system is fitted with a 0.5 micron extended pass carbon block filter.
- Ideal for point-of-use applications such as under the kitchen sink, office water coolers, water vending machines, boats and recreational vehicles
- Electronic lamp indicator
- "Entry level" point-of-use UV system for recommended flow rates up to 2 GPM (8 lpm)
Features
- Water Disinfection
- Easy to change lamp and filters
- Lamp and ballast matched for quality assurance
- Simple installation
These systems are for the supplemental treatment of disinfected drinking water which has been treated or other drinking water which has been tested and deemed acceptable for human consumption by the state or local health agency having jurisdiction. These systems are designed to reduce normally occurring non-pathogenic nuisance organisms and is not intended for the treatment of contaminated water. The contaminants and other substances reduced by this water treatment device are not necessarily in your water. In addition, the presence of certain contaminants in your drinking water does not necessarily pose a health risk.
Specifications & Performance
- Model: UVB1-ECP
- # of Sumps: 1
- Sump Type: #10
- Sump #1 Content: EPCB Carbon/UV
- Sump #2 Content: No 2nd sump
- Sump #3 Content: No 3rd sump
- Lamp #: #11
- Power Used: 14 Watts
- Voltage: 220 VAC (115 VAC option is part number 15610111)
- Flow Rate: 2 GPM
- Dimensions: 15" x 5" x 5"
- Shipping Weight: 10 lbs
- Inlet/Outlet Size: 3/8" NPT
Feed Water Supply
- Feed Water Pressure: 20-75 PSI (Must not exceed 75)
- Feed Water Temperature: 38° - 106° F
- pH Range: 6.5-9.5
- Total Dissolved Solids: < 1500 mg/L
- Total Suspended Solids: < 10 mg/L
- Turbidity: < 5 NTU
- Hardness: < 120 (7 GPG)
- Iron: < 0.3 mg/L
- Manganese: < 0.05 mg/L
