Webtrol SPC150-3T, Self Priming SS Centrifugal Pump
The Webtrol Stainless Steel, Self-Priming Centrifugal Pump is the professionals choice when it comes to a self priming centrifugal that has a suction lift of 25'. In many applications it is not possible to install the pump below the water line of the fluid being pumped, to provide a gravity flow into the pump. The Webtrol stainless steel, self priming centrifugal pump is designed to be installed above the water line where a suction lift would be required. These versatile pumps offer a superior alternative to standard cast iron jet or centrifugal pump.
Features/Benefits
• Closed Coupled - For smooth transmission of power
• 304L Stainless steel - Pump case, motor bracket and impeller
• Centerline Discharge - Provide maximum resistance to misalignment
• Non-Overloading Motor - Rated for continuous duty throughout the enitre operating range
• High Operating Efficiencies - Over a wide range of capacities which lower operating costs
• Mechanical Seals - For maximum reliability and economic value
• Back Pullout Design - For ease of servicing the pump without disturbing the piping system
Specifications
| Discharge | 1" FNPT |
| Suction | 1-1/4" FNPT |
| Motor | TEFC |
| HP | 1-1/2 |
| Phase | 3 Phase |
| Voltage | 230/460 |
| Length | 19.50" |
| Max Operating Temp | 113° F |
| Frequency | 60 Hz |
| Speed | 3450 RPM |
Pump Curve
| Total Head (Ft) | 180.0 | 160.0 | 140.0 | 125.0 | 100.0 | 90.0 |
| GPM | 2 | 6 | 10 | 14 | 18 | 19 |
Curves are based on 60 Hz. 3450 rpm motors. These curves are for general guidance only, individua pump curves are available upon request.
Construction
| Wetted Materials | 304SS |
| Elastomers | Buna-Nitrile |
| Case | 304SS |
| Shaft | 304SS |
| Bracket | Aluminum |
| Mechanical Seal Face | Carbon-ceramic |
| Mechanical Seal Type | Single |
| Warranty | 1 Year |
Applications
• Deionized systems
• Reverse Osmosis systems
• Home drinking water systems
• Distribution Systems
• Misting systems
• Liquid transfer systems
• Circulation systems
• Pre-filter charge system
• Condensation systems
• Cooling tower systems
| Discharge | 1" FNPT |
| Suction | 1-1/4" FNPT |
| Motor | TEFC |
| HP | 1-1/2 |
| Phase | 3 Phase |
| Voltage | 230/460 |
| Length | 19.50" |
| Max Operating Temp | 113° F |
| Frequency | 60 Hz |
| Speed | 3450 RPM |
Pump Curve
| Total Head (Ft) | 180.0 | 160.0 | 140.0 | 125.0 | 100.0 | 90.0 |
| GPM | 2 | 6 | 10 | 14 | 18 | 19 |
Curves are based on 60 Hz. 3450 rpm motors. These curves are for general guidance only, individua pump curves are available upon request.
Construction
| Wetted Materials | 304SS |
| Elastomers | Buna-Nitrile |
| Case | 304SS |
| Shaft | 304SS |
| Bracket | Aluminum |
| Mechanical Seal Face | Carbon-ceramic |
| Mechanical Seal Type | Single |
| Warranty | 1 Year |
