Webtrol H10B4S16-3 EZ Series Booster Pump
Webtrol has been building Booster Pumps for over 40 years for various industrial, commercial, and agricultural uses and has long been a leader in the Reverse Osmosis and Deionization Industry.
Webtrol's commitment to quality is defined in the constuction of of EZ series Booster Pump, through use of only quality materials and precision machining by journeyman machinists. Every pump us hand assembled and checked during each step, up to the final test, where each pump is checked for flow, pressure, power consumption, leaks vibration and noise.
Features/Benefits
• Rated for continous duty
• Available in both Stainless Steel and Cast Iron Fitted models
• Heavy duty stainless steel hex shaft with stainless steel coupling
• High strength, glass filled Delrin, polycarbonate or Noryl impellers precision machined for dimensional stability and effciency
• Injection molded polycarbonate or Noryl diffusers with molded in stainless stell wear rings at all critical points.
• Heavy wall stainless stell pump housing
Specifications
Webtrol EZ Series Booster Pumps are available from 5 to 35 GPM. Pressures to 500 PSI
| Model Number | H10B4S16-3 |
| Suction | 1" FNPT |
| Discharge | 1" FNPT |
| HP | 0.75 HP |
| Phase | 3 Phase |
| Voltage | 230/460 |
| Mounting | JM |
| Max Inlet Pressure | Standard: 100 PSI Optional: 250 PSI |
| Frequency | 50/60 Hz |
| Speed | 3450 RPM |
| Enclosure | ODP (Open Drip Proof) |
Construction
| Inlet/Motor Bracket | 316 SS |
| Discharge Housing | 316 SS |
| Pump Housing | 316 SS |
| Impellers | Thermoplastic |
| Diffusers | Thermoplastic |
| Wear Rings | 316 SS |
| Shaft & Coupling | 316 SS |
| Shaft Bearing Sleeve | 316 SS |
| Mechanical Seal | Carbon/Ceramic |
| O-Rings | Viton |
Applications
• Reverse Osmosis
• Deionization
• Car wash
• Washdown
• Industrial
Webtrol EZ Series Booster Pumps are available from 5 to 35 GPM. Pressures to 500 PSI
| Model Number | H10B4S16-3 |
| Suction | 1" FNPT |
| Discharge | 1" FNPT |
| HP | 0.75 HP |
| Phase | 3 Phase |
| Voltage | 230/460 |
| Mounting | JM |
| Max Inlet Pressure | Standard: 100 PSI Optional: 250 PSI |
| Frequency | 50/60 Hz |
| Speed | 3450 RPM |
| Enclosure | ODP (Open Drip Proof) |
Construction
| Inlet/Motor Bracket | 316 SS |
| Discharge Housing | 316 SS |
| Pump Housing | 316 SS |
| Impellers | Thermoplastic |
| Diffusers | Thermoplastic |
| Wear Rings | 316 SS |
| Shaft & Coupling | 316 SS |
| Shaft Bearing Sleeve | 316 SS |
| Mechanical Seal | Carbon/Ceramic |
| O-Rings | Viton |
