Thornton M200 Easy Instrument, 1/4 DIN (panel mount) Single Channel, 30280748

When no-fuss measurement solutions are required, choices abound but results can vary widely. From component selection to configuration through cumbersome calibration, time can be lost before tangible results are obtained. But with the Mettler Toledo easy Line, Plug, & Play components fit together easily for maximum compatibility and simplicity of use. The easy line relies on digital technology for seamless communication between the transmitter and the sensors. This includes serial number, factory and user calibration, for Plug and Play measurement convenience. Simply connect the easy-Sense sensors and the M200 easy does the rest. The same multi parameter transmitter can be used for all sensor types: pH, ORP, oxygen and conductivity.

- Parameters: Flow

- Channels: 1

- Electrical: 100-240 VAC, 20-30 VDC, 10 VA

- Enclosure: P65

- Flow Inputs: 1

- User Interface: 4-line backlit LCD, 5-button key pad

- Password Protection: Yes

- Current Outputs: Two 4-20 mA alarm, galvanically isolated from input and from earth/ground

- Service Interface: USB

- Flow Range: 0 to 9999 GPM, L/min, m^3/hr

- Total Flow Range: 0 to 999,999,999 Gallons, 999,999,999 Liters, 999,999,999 m^3, 

- RO% Recovery Range: 0 to 100%

- Flow Velocity Range: Equivalent ft/s, m/s

- Frequency Range: 1 to 4,000 Hz

- Calculated Parameters (4-Channel): Ratio, Sum, and Difference of Two Flow Rates

- Resolution: 4 significant digits, auto-ranged, up to 8 digits for total flow

- Update Rate: Displays and outputs, Once per 2 seconds

- Input Pulses: Low <1.0 volt; High >1.4 volts (36 volts max)

- Accuracy: +/- 0.5 Hz

- Repeatability: +/- 0.2 Hz

- Setpoints/Alarms: 4 - High, Low, Outside, or Between

- Relays: 2-SPDT mechanical, 1 SPST NO, 1 SPST NC, rated at 250 VAC, 3 Amps resistive

- Analog Output Signals: 2

- Discrete Inputs, for External Totalizer Reset: 1

- 58004302