Serv-A-Pure MiniPak Deionized Water Filter
Get deionized water filters like the Serv-A-Pure MiniPak-0844. The Serv-A-Pure MiniPak deionized water unit is an economical, easy-to-use, and all-in-one unit that will meet nearly all purified water needs. It incorporates all the benefits and simplicity of deionization (DI) without the added cost, complexity, and water waster of reverse osmosis (RO).
Serv-A-Pure MiniPak Deionized Water System Features:
No More Waiting for Water: The MiniPak does not use any reservoir which allows bacteria to build up. All water produced is purified as it is drawn off to reduce any possibility of bacteria contamination. The MiniPak can provide you with 3.0 gallons per minute of deionized water. Whether you use 1 gallon or 100 gallons, the MiniPak is a perfect fit for nearly every application.
A Perfect Fit for Almost Any Application: The MiniPak is designed to provide water that is of high purity and low TOC and is ideally suited for routine laboratory applications.
Big Service On A Small Budget: Every MiniPak come with free phone support. Your MiniPak cartridges can be changed out easily by any user, and all cartridges can be sent to you via standard carrier to allow for more economic changes.
Low Maintenance: All filters on the MiniPak are recommended to be changed at least every six months (depends on water usage). This allows maintenance to take place as little as two times per year.
Serv-A-Pure MiniPak-0844 Flow Schematic
The MiniPak System performs a 5 stage purification process*:
- Stage 1: (1) 5-micron pre-sediment filter
- Stage 2: (1) GAC-20 cartridge: Used for Organic/Chlorine removal
- Stage 3: (1) Worker DI tank (tank size varies depending on the system)
- Stage 4: (1) Polisher DI tank (tank size varies depending on the system)
- Stage 5: (1) 1 Micron Post Filter or (1) 0.2-micron Bacteria Filter
*Every MiniPak system can be custom designed to meet your specific needs. If you do not see your exact needs here, please contact us for specific customization.
The capacity of a filter set is dependent on the quality of the water fed to the system. The worse water fed to a system, the less amount of gallons of pure water it will produce. The better the feed water, the more gallons of pure water the filter pack will produce. The following chart is to be used as a reference only, as to how many gallons a typical DI filter pack will produce.
| Feed Water Quality PPM |
Feed Water Quality us/cm |
Approx. Gallons Produced per Each of 844 Tanks |
| 5.0 | 7.8 | 42,034 |
| 20 | 31 | 10,509 |
| 50 | 78 | 4,063 |
| 100 | 156 | 2,032 |
| 200 | 313 | 1,016 |
| 300 | 468 | 677 |
| 400 | 588 | 508 |
| 500 | 762 | 406 |
| 600 | 853 | 339 |
| 1,000 | 1,560 | 203 |
835 DI Tank Size
| Feed Water Quality PPM |
Feed Water Quality us/cm |
Approx. Gallons Produced per Each of 835 Tanks |
| 5.0 | 7.8 | 33,628 |
| 20 | 31 | 8,407 |
| 50 | 78 | 3,251 |
| 100 | 156 | 1,625 |
| 200 | 313 | 813 |
| 300 | 468 | 542 |
| 400 | 588 | 406 |
| 500 | 762 | 325 |
| 600 | 853 | 271 |
| 1,000 | 1,560 | 163 |
| Feed Water Quality PPM |
Feed Water Quality us/cm |
Approx. Gallons Produced per Each of 818 Tanks |
| 5.0 | 7.8 | 16,814 |
| 20 | 31 | 4,204 |
| 50 | 78 | 1,625 |
| 100 | 156 | 813 |
| 200 | 313 | 407 |
| 300 | 468 | 271 |
| 400 | 588 | 203 |
| 500 | 762 | 163 |
| 600 | 853 | 135 |
| 1,000 | 1,560 | 82 |
Operating Conditions
| Service Flow Rate | 0.5 - 5.0 gpm (model specific) |
| Max. Pressure | 125 psi |
| Max. Temperature | 120° F |
| pH Range | 1 to 14 |
| Wetted Materials | Fittings: Polypropylene and 304 Stainless Steel O-Rings: Buna-N Filters: ABS & Polyester |
- Feed Water Specifications: Potable tap water with conductivity < 2000 uS/cm at a pressure of 15-90 PSI
- Flow Rate: Up to 5.0 GPM
- Final Water Resistivity: > 1.0 MegOhm (Type II Typically)
- Operating Temperature Range: 35 - 100°F
- TOC: < 500 ppb
- Wall Plate Dimensions (H x W x D): 24" x 28" x 6"
- Floor Space Dimensions (H x W x D): 72" x 28" x 8"
