Serv-A-Pure MicroPak-BB Deionized Water Filter System
The Serv-A-Pure wall mounted deionized water system comes pre-assembled and ready to use with everything you need to get up and running. This three-stage DI system delivers high-quality water at a flow rate up to 1.2 GPM. Our deionized water systems like the Serv-A-Pure MicroPak-BB include the brackets and filter housings and comes with the following:
- (1) 4.5" x 10" 5 Micron Carbon Block Filter
- (2) 4.5" x 20" High Purity (up to 1 MegOhm Purity Light) or High Capacity (up to 50K Purity Light) DI Cartridges
- (1) SW-4 Plastic Filter Housing Spanner Wrench
- 10' 3/8" Inlet Tubing
- 10' 1/2" PVC Out Hose
- (1) Resistivity Light - 10K, 20K, 50K, 200K, 500K or 1.0 Meg
- *** Not for use with Medical Applications ***
- On-demand deionized water system makes DI water as you need
- You can choose from 6 different purity light ranges to meet your exact system needs
- Designed for city water & tap water supply
- The cartridge life is expected to last longer with an RO system
- Available in high purity and high capacity configurations
- Flow restricted to ensure purest water quality
- Pressure Range: 10-100 psi
- Temperature Range: 40 - 100 deg F
- Maximum Flow Rate: 1.2 gallons per minute (gpm)
- Resistivity Monitor (optional): up to 1.0+ MegOhm
- Resistivity DI Light Set Point: 10, 20, 50, 200, 500 KOhm or 1.0 MegOhm (Fixed Range)
- Voltage: 120 VAC
Serv-A-Pure MicroPak-BB Deionized Water System Features:
Serv-A-Pure MicroPak-BB Requirements:
Capacities
The capacity of a filter set is dependent on the quality of the water fed to the system. The worse water fed to a system, the less amount of gallons of pure water it will produce. The better the feed water, the more gallons of pure water the filter pack will produce. The following chart is to be used as a reference only, as to how many gallons a typical HYK-002 filter pack will produce.
The capacity of a filter set is dependent on the quality of the water fed to the system. The worse water fed to a system, the less amount of gallons of pure water it will produce. The better the feed water, the more gallons of pure water the filter pack will produce. The following chart is to be used as a reference only, as to how many gallons a typical HYK-002 filter pack will produce.
| Feed Water Quality PPM | Feed Water Quality us/cm | Approx. Gallons Produced per HYK-002 Filter Kit |
| 5.0 | 7.8 | 13,600 |
| 20 | 31 | 3,400 |
| 50 | 78 | 1,360 |
| 100 | 156 | 680 |
| 200 | 313 | 340 |
| 300 | 468 | 225 |
| 400 | 588 | 170 |
| 500 | 762 | 135 |
| 600 | 853 | 115 |
| 1,000 | 1,560 | 70 |
Operating Conditions
| Service Flow Rate | 1.2 GPM Max |
| Max. Pressure | 90 psi |
| Max. Temperature | 120° F |
| pH Range | 1 to 14 |
| Wetted Materials | Fittings: Polypropylene and 304 Stainless Steel O-Rings: Buna-N Filters: ABS & Polyester |
- Flow Rate Recommended: 0.5 GPM
- Flow Rate Max: 1.5 GPM
- Water Quality:
- With High Purity Cartridges: 1.0+ Meg Ohm
- With High Capacity Cartridges: >20 KOhm
- Cartridge Capacities:
- High Purity Cartridges:
- Total Capacity (Grains as CaCO3): 2,350 per cartridge (2 cartridges per system)
- Estimated Gallons (200 PPM Feed): 170 per cartridge (2 cartridges per system)
- Estimated Gallons (5 PPM Feed) 6,800 per cartridge (2 cartridges per system)
- High Capacity Cartridges:
- Total Capacity (Grains as CaCO3): 2,500 per cartridge (2 cartridges per system)
- Estimated Gallons (200 PPM Feed): 205 per cartridge (2 cartridges per system)
- Estimated Gallons (5 PPM Feed) 8,500 per cartridge (2 cartridges per system)
- Max Temperature: 100°F
- Max Pressure: 90 psi
- Inlet Connection: 3/8" Tubing (This can be removed and there is a 1" FPT connection)
- Outlet Connection: 1/4" NPT Valve with tapered hose barb
- Dimensions:
- Width: 23-1/4" (no inlet/outlet connection included in this measurement)
- Height: 26-1/2"
- Depth: 8-1/2"
- Flow Rate Max: 1.5 GPM
- Water Quality:
- With High Purity Cartridges: 1.0+ Meg Ohm
- With High Capacity Cartridges: >20 KOhm
- Cartridge Capacities:
- High Purity Cartridges:
- Total Capacity (Grains as CaCO3): 2,350 per cartridge (2 cartridges per system)
- Estimated Gallons (200 PPM Feed): 170 per cartridge (2 cartridges per system)
- Estimated Gallons (5 PPM Feed) 6,800 per cartridge (2 cartridges per system)
- High Capacity Cartridges:
- Total Capacity (Grains as CaCO3): 2,500 per cartridge (2 cartridges per system)
- Estimated Gallons (200 PPM Feed): 205 per cartridge (2 cartridges per system)
- Estimated Gallons (5 PPM Feed) 8,500 per cartridge (2 cartridges per system)
- Max Temperature: 100°F
- Max Pressure: 90 psi
- Inlet Connection: 3/8" Tubing (This can be removed and there is a 1" FPT connection)
- Outlet Connection: 1/4" NPT Valve with tapered hose barb
- Dimensions:
- Width: 23-1/4" (no inlet/outlet connection included in this measurement)
- Height: 26-1/2"
- Depth: 8-1/2"
