Serv-A-Pure 731322, BBFS-222IR, Sediment/Taste & Odor/Iron Removal System
You are buying a 3 step whole house water filtration system that will remove sediment, taste & odor and up to 3 ppm dissolved iron from your water. This system comes standard with a DGD-5005-20 sediment filter, an EPM-20BB taste & odor filter, and a RFFE20-BB iron reduction filter.
Options for this system include
• 3/4", 1" or 1-1/2" Inlet/Outlet
• Wall Mounting Bracket and Mounting Hardware
• 3 Stage Filtering Process
- Stage 1: Sediment filter removes sand dirt, rust and all other types of sediment
- Stage 2: RFFE20-BB iron reduction filter effectively removes up to 3 ppm dissolved iron in your water, chose the alternate filter to also help with hydrogen sulfide removalTaste & Odor filter helps to remove unwanted tastes/odors, chlorine tastes/odors, and a 99.5% reduction of cryptosporidium, giardia, entamoebo and toxoplasma cysts depending on the filter you choose.
- Stage 3: Taste & Odor filter helps to remove unwanted tastes/odors, chlorine tastes/odors, and a 99.5% reduction of cryptosporidium, giardia, entamoebo and toxoplasma cysts depending on the filter you choose.
• SW-4 Wrench
• 1" Inlet/Outlet Ball Valve
• 0-100 PSI Simmons pressure gauges staged throughout the system.
• SW-4 Wrench
• 1" Inlet/Outlet Ball Valve
• 0-100 PSI Simmons pressure gauges staged throughout the system.
Pressure Gauge Locations
• Pressure Gauge #1 - Located at the inlet of the first filter housing. Measures incoming pressure to system.
• Pressure Gauge #2 - Located at the inlet of the 2nd housing. Measures pressure drop across 1st sediment filter.
• Pressure Gauge #3 - Located at the inlet of the 3rd housing. Measures pressure drop across 2nd filter.
• Pressure Gauge #4 - Located at the outlet of the 4th housing. Measures pressure drop across the 3rd filter
It is recommended that your sediment filter be the first filter to come into contact with the water to help remove sediment that will cause premature plugging of both the taste/odor filter and the iron reduction filter.
In the available options below, you will be able to change what sediment and taste/odor filter you will want shipped to you. This system comes standard with a DGD-5005-20 sediment filter, EPM-20BB taste/odor filter, and RFFE20-BB iron reduction filter. Choose the AF-20-2215-BB filter is you wish to also remove small amounts of hydrogen sulfide from your water (> 1 mg/L).
• Pressure Gauge #1 - Located at the inlet of the first filter housing. Measures incoming pressure to system.
• Pressure Gauge #2 - Located at the inlet of the 2nd housing. Measures pressure drop across 1st sediment filter.
• Pressure Gauge #3 - Located at the inlet of the 3rd housing. Measures pressure drop across 2nd filter.
• Pressure Gauge #4 - Located at the outlet of the 4th housing. Measures pressure drop across the 3rd filter
It is recommended that your sediment filter be the first filter to come into contact with the water to help remove sediment that will cause premature plugging of both the taste/odor filter and the iron reduction filter.
In the available options below, you will be able to change what sediment and taste/odor filter you will want shipped to you. This system comes standard with a DGD-5005-20 sediment filter, EPM-20BB taste/odor filter, and RFFE20-BB iron reduction filter. Choose the AF-20-2215-BB filter is you wish to also remove small amounts of hydrogen sulfide from your water (> 1 mg/L).
- Estimated Flow Rate: 5 GPM (This varies depending on which cartridge you choose. Check filter specifications for actual flow rate)
- Max Temperature: 100°F
- Max Pressure: 90 psi
- pH: >7, if below 7, contact Serv-A-Pure for proper application
- Dimensions:
- Width
- No In/Out Valve: 23-1/4"
- 1/2" In/Out Valve: 29-1/2"
- 3/4" In/Out Valve: 30"
- 1" In/Out Valve: 30-3/4"
- 1-1/2" In/Out Valve: 33-1/2"
- Height
- No Drain Valve: 26-1/2"
- With Drain Valve: 29-1/4"
- Depth: 8-1/2"
- Weight: 35 lbs (with no cartridge or in/out valves)
