ServAPure 713002, BBFS-2-IR 20'' Big Blue Whole House Iron Removal Water Filter System

Brand: Serv-A-Pure

(No reviews yet) Write a Review
MSRP: $340.93
Your Price: $252.54
(You save $88.39 )
Quantity Price
1-1 $252.54
2-3 $247.49
4+ $239.91
Adding to cart… The item has been added
Typically Ships Same Day
Serv-A-Pure 713002, BBFS-2-IR 20" Big Blue Whole House Iron Removal Water Filter System

You are buying a whole house water filter system that helps to remove iron from your water supply. This system can remove up to 3 PPM iron from your water. If you have higher than 3 PPM iron in your water, please contact us for additional treatment options. Follow the steps below to design the perfect filtration system for your needs.

Select Inlet/Outlet Sizing:
You can choose either 1/2", 3/4", 1" or 1-1/2" inlet/outlet sizing. All sizes are male pipe thread connections. Also, the filter system can come equipped with or with ball valves on the inlet/outlet. Installing these ball valves allows you to turn the water off right at the housing when time to change the filter and also isolate the filter housing when changing the filter so the whole house does not drain back through the filter housing. Ball valves are not a necessity but make turning the water off a much simpler task.

Select Filter:
There are only 2 options here for you to choose The RFFE20-BB filter is only for Iron Removal. The AF-20-2215-BB is used to remove iron, hydrogen sulfide (rotten egg smell) and other tastes/odors from your water. If you need any assistance in picking out a filter, please contact us at 800-338-4905 for help.


Select Flow Direction
Choose the flow direction that flow through your housing once it is installed. It will be either left to right or right to left. If you choose the wrong direction, that is ok. Once you receive the housing the bracket and gauges (if ordered) would just have to be turned around.

Select Pressure Gauges:
Having pressure gauges installed allow you to monitor the pressure drop of your system. If the pressure drop becomes too high, you know it is time to change out your filter. You have 3 different options here:

     - 2 Pressure Gauges/No Relief Button: Having 2 pressure gauges installed allow you to see the inlet and outlet pressure of the filter. Once the difference between the 2 gauges becomes too high, you know it is time to change your filter out. Installing 2 gauges removes the pressure relief (red) button from the top of the housing.

     - 1 Pressure Gauge/1 Pressure Relief Button: The pressure release button is located on the inlet of the housing and the pressure gauge will be installed on the outlet of the housing. With this option you will always be able to see the outlet pressure of the filter.

     - 0 Pressure Gauges/1 Pressure Relief Button:
The pressure release button is located on the inlet of the housing and no pressure gauge will be installed.

Select Accessories:
There is only 1 accessory that can be chosen with this filter housing system, a spanner wrench. The spanner wrench fits around the outside of the housing and assists you in removing the sump from the cap when it is time to change the filter. You can choose the standard plastic wrench, the metal life time warranty wrench or no wrench at all.

Drain Valve:
Adding a drain valve to this system can serve 2 purposes. The first is that this gives you a spot to release the pressure on the system when it is time to change the filter. Secondly, it helps remove some of the weight by removing the water from the housing making the system lighter to handle.

Housing Color:
This system can come in 2 different color variations. The standard way is with a black cap and a blue sump. The optional way is to get this system with a blue cap and a clear sump. Having a clear sump allows you to visually inspect the filter without having to remove it from the housing.
Technical Specification

- Estimated Flow Rate: 5 GPM (This varies depending on which cartridge you choose. Check filter specifications for actual flow rate)
- Max Temperature: 100°F
- Max Pressure: 90 psi
- pH: >7, if below 7, contact Serv-A-Pure for proper application
- Dimensions:
     - Width
          - No In/Out Valve: 7-1/4"
          - 1/2" In/Out Valve: 13-1/2"
          - 3/4" In/Out Valve: 14"
          - 1" In/Out Valve: 14-3/4"
          - 1-1/2" In/Out Valve: 17-1/2"
     - Height
          - No Drain Valve: 29-3/8"
          - With Drain Valve: 32-1/8"
     - Depth: 8-1/4"
     - Weight: 10 lbs (with no cartridge or in/out valves)
Weight:
20.00 LBS