ServAPure 712001, BBFS-1-TOR 10'' Big Blue Whole House Taste/Odor Water Filter System

You are buying a whole house water filter system that helps to remove unwanted tastes and odors, chlorine taste and odors, and a 99.5% reduction of cryptosporidium, giardia, entamoebo and toxoplasma cysts depending on the filter you choose. This system comes completely assembled and ready to be installed.

Options for this system include:

(1) Big Blue Filter Housing
(1) Spears Inlet Ball Valve
(1) Spears Outlet Ball Valve
(1) Big Blue Housing Filter Bracket
(1) SW-3 Filter Wrench for Big Blue Housing
(2) 100 PSI Simmons Pressure Gauges
(1) Big Blue Carbon Filter (Standard system comes with a GAC-BB)

This system is designed where all you need to do is hook up to existing plumbing, insert filter and it is ready to use. Installed on the inlet and the outlet of the filter housing are two ball valve. This allows you to isolate the filter housing to easily change filters. The system comes equipped with 2 pressure gauges, one on the inlet of the filter housing, the second on the outlet of the filter housing. This allows you to view the pressure drop across the filter, and when this drop becomes too great, you know it is time to change your filter. 

Step #1
Choose your whether or not you want an SW-3 wrench. A SW-3 wrench helps with the removal of the sump when it is time to change filters.

Step #2
• Choose the type of carbon filter you want.
• GAC-BB is used to remove chlorine tastes and odors from your drinking
• RFC-BB is used to remove chlorine tastes and odors without experiencing much pressure drop across the filter
• CBC-BB is used to remove chlorine tastes and odors along w/ a 99.5% reduction of cryptosporidiumn giardia, entamoebo and toxoplasma cysts
• NCP-BB is ideal for post reverse osmosis system and well water applications
• EP-BB is highly effective at removing bad taste and odor for a cheaper cost, comes with a 5 micron post filter
• EPM-BB is highly effective at removing bad taste and odor for a cheaper cost, comes with a 10 micron post filter

Step #3
Choose the inlet/outlet sizing to match up to your existing plumbing, This is offered in 1/2", 3/4", 1" and 1-1/2"

Step #4
Choose your pressure gauge option:
• 2 Pressure gauges lets you see the pressure drop across the filter and helps determine when the filter needs to be changed.
• 0 Pressure gauges and 1 pressure relief button is when you do not need any pressure gauges and still gives you the pressure relief button which relieves the pressure in the housing to make it easier to remove the sump when changing housings.

Step #5
Choose the flow direction of the water running through your pipes, either right to left, or left to right. This helps us assemble your system so when you receive it, all you have to do is mount it to the wall and plumb to it.

If you do not know which way the water is flowing, that is ok. Once you receive the system the bracket can be easily removed and flipped around to properly mount the system.