ResinTech SIR-1200, Uranium Removal Anion Resin, 1 Cubic Foot
ResinTech SIR-1200 is a chloride form type 1 gel strong base anion resin. ResinTech SIR-1200 is intended for use in uranium removal as well as removal of other trace contaminants such as chromate and arsenate. SIR-1200 is supplied in the chloride form.
Features & Benefits
- High Total Capacity: Optimized to provide high throughput capacities, especially in pump-and-treat once-through applications
- Controlled Particle Size: 16 to 50 mesh size provides a low pressure drop and superior kinetics
- Superior Physical Stability: 93% plus sphericity and high crush strengths together with carefully controlled particle distribution provides long life and low pressure drop
- Complies With US FDA Regulations: Conforms to paragraph 21CFR173.25 of the Food Additives Regulations of the US FDA
- Complies With US FDA Regulations: Conforms to paragraph 21CFR173.25 of the Food Additives Regulations of the US FDA
Applications:
- Trace Contaminant Removal (U, Cr, As, Se, ClO4): ResinTech SIR-1200 has high capacity and can be used to remove a variety of trace contaminants, even when that contaminant is not highly preferred compared to the other bulk ions in the feedwater. Useful capacities are obtained when the feedwater TDS is substantially less than the resin’s internal TDS. Uranium, chromate, and perchlorate are particularly well removed. Arsenate and selenate are well removed but can be chromatographically displaced by sulfate and other ions.
- Radwaste: ResinTech SIR-1200 is ideally suited for radwaste applications requiring the removal of radioactive anions, especially when the feed is significantly
radioactive. The high crosslinking content of SIR-1200 gives it improved resistance to chemical damage caused by ionizing radiation. Structural integrity is maintained up to approximately 1 x 109 rads exposure.
- Precious Metal Removal: ResinTech SIR-1200 has high capacity for precious metals, when those metals are present as anions or as anionic complexes. SIR-1200 will remove traces of precious metal cyanides from plating rinse waters, allowing the recovery of the metal by incineration. Photographic wastes containing silver can be removed and the silver “fixed” to the resin by regeneration with sulfuric acid. Anionic chloride complexes can be removed and then eluted with water.
- Molybdate Removal: ResinTech SI R-1200 has exceptionally high affinity for molybdate ions, even in the presence of substantial concentrations of other ions. Regeneration
is accomplished with sodium chloride brine in a fashion similar to a water softener, or with a variety of other salts such as sodium bicarbonate for applications where an increase in chloride ions is undesirable.
Physical Properties- Radwaste: ResinTech SIR-1200 is ideally suited for radwaste applications requiring the removal of radioactive anions, especially when the feed is significantly
radioactive. The high crosslinking content of SIR-1200 gives it improved resistance to chemical damage caused by ionizing radiation. Structural integrity is maintained up to approximately 1 x 109 rads exposure.
- Precious Metal Removal: ResinTech SIR-1200 has high capacity for precious metals, when those metals are present as anions or as anionic complexes. SIR-1200 will remove traces of precious metal cyanides from plating rinse waters, allowing the recovery of the metal by incineration. Photographic wastes containing silver can be removed and the silver “fixed” to the resin by regeneration with sulfuric acid. Anionic chloride complexes can be removed and then eluted with water.
- Molybdate Removal: ResinTech SI R-1200 has exceptionally high affinity for molybdate ions, even in the presence of substantial concentrations of other ions. Regeneration
is accomplished with sodium chloride brine in a fashion similar to a water softener, or with a variety of other salts such as sodium bicarbonate for applications where an increase in chloride ions is undesirable.
- Polymer Structure: Styrene/DVB
- Functional Group: Trimethylamine
- Physical Form: Spherical Beads
- Ionic Form as Shipped: Chloride
- Total Capacity: >1.4 meq/mL
- Total Capacity: >1.4 meq/mL
- Water Retention: 42 to 51 percent
- Approximate Shipping Weight: 44 lbs per cu. ft.
- Screen Size Distribution (US Mesh): 16 to 50
- Maximum Fines Content (< 50 mesh): 1%
- Resin Color: White to Amber
Suggested Operating Conditions
- Maximum Continuous Temperature: 170°F
- Minimum Bed Depth: 24 Inches
- Backwash Expansion: 25 to 50 percent
- Maximum Pressure Loss: 20 psi
- Operating pH Range: 0 to 14 SU
- Service Flow Rate: 1 to 10 gpm per cubic foot
