ResinTech SACMP Cation Exchange Resin, Na Form, 1 Cubic Foot
ResinTech SACMP os a sodium form macroporous highly cross linked strong acid cation resin. SACMP is intended for high flow rate and high temperature polishing applications, as well as other applications that require the highest possible physical strength and chemical durability.
Features & Benefits
- Macroporous Structure: Gives greatly increased life in stressful applications where resin degradation due to thermal and oxidative effects is anticipated
- Controlled Particle Size: 16 to 50 mesh size provides a low pressure drop and superior kinetics
- Superior Physical Stability: 98% plus sphericity and high crush strengths together with carefully controlled particle distribution provides long life and low pressure drop
- Complies With US FDA Regulations: Conforms to paragraph 21CFR173.25 of the Food Additives Regulations of the US FDA
Applications:
- Demineralization: ResinTech SACMP-H can be used as the cation component in demineralization configurations where a hydrogen form cation resin is coupled with a hydroxide form anion resin. SACMP-H is ideal for high flow rate polishers and where high resistance to mechanical, thermal and oxidative stresses is required.
- Radwaste: SACMP is ideally suited for radwaste applications. The high cross linking content of SACMP gives improved resistance to chemical damage caused by ionizing radiation. Structural integrity is maintained up to approximately 1 x 10^9 rads exposure.
- Polymer Structure: Styrene/DVB
- Polymer Type: Macroporous
- Functional Group: Sulfonic Acid
- Physical Form: Spherical Beads
- Ionic Form as Shipped: Sodium
- Column Capacity: >1.65 meq/mL
- Water Retention: 45 to 55 percent
- Approximate Shipping Weight: 50 lbs per cu. ft.
- Swelling, Na to H: 3 to 5%
- Screen Size Distribution (US Mesh): 16 to 50
- Maximum Fines Content (< 50 mesh): 1%
- Minimum Sphericity: 95%
- Resin Color: Tan
Suggested Operating Conditions
- Maximum Continuous Temperature: 300°F
- Minimum Bed Depth: 24 Inches
- Backwash Expansion: 24 to 50 percent
- Maximum Pressure Loss: 25 psi
- Operating pH Range: 0 to 14 SU
- Regenerant Concentration:
- Hydrogen Cycle: 5 to 10% HCl
- Hydrogen Cycle: 1 to 8% H2SO4
- Salt Cycle: 10 to 15 % NaCl
- Regenerant Level: 4 to 15 lbs per cu. ft.
- Regenerant Flow Rate: 0.5 to 1.5 gpm per cu. ft.
- Displacement Flow Rate: Same as dilution water
- Displacement Volume: 10 to 15 gallons per cu. ft.
- Rinse Flow Rate: Same as service flow
- Rinse Volume: 35 to 60 Gallons per cubic foot
- Service Flow Rate: 1 to 10 gpm per cubic foot
