ResinTech MBD-10 Mixed Bed Resin, High Purity Grade, 1 Cubic Foot
ResinTech MBD-10 is intended for use in all mixed bed deionization applications that require high resistivity and high capacity. MBD-10 is particularly well suited for portable exchange and other polishing applications. MBD-10 is supplied ready to use with the cation component in the hydrogen form and that anion component in the hydroxide form.
Features & Benefits
- Highest Operating Capacity: High capacity anion component results in the highest throughput possible with mixed bed resin
- Ease of Separation: Density and color difference between cation and anion components results in good backwash separation during regeneration
- Superior Thermal and Physical Stability: High cross linked anion component provides superior resistance to thermal and physical stresses
- Ideal For Portable Exchange DI Systems: All resin parameters are optimized for use in portable exchange DI systems were the resin is regenerated at a central facility
- Complies With US FDA Regulations: Conforms to paragraph 21CFR173.25 of the Food Additives Regulations of the US FDA
Applications:
- Cartridge Use: ResinTech MBD-10 premixed mixed bed is ideal for single cartridge applications where the longest possible throughput capacity is desired. The ratio of anion to cation is optimized to provide balanced exchange of both cations and anions as well as to maximize throughput life.
- Portable Exchange Deionization: ResinTech MBD-10 can be used in PEDI applications to remove bulk TDS from raw waters or to remove trace levels of TDS following reverse osmosis or other desalination processes. MBD-10 can be separated into its components, CG8-H-BL and SBG1-OH, for regeneration, and reused hundreds of thousands of times. The cation component, CG8-H-BL, is black in color and provides optimized color difference from SBG1-OH. This color difference is very helpful to verify resin separation during backwash.
- High Temperature Use: ResinTech MBD-10 can be used at temperatures up to approximately 180°F and will still provide reasonable like in single use applications. The anion component is one of the most thermally stable strong base anion resin commercially available and allows operation well above the temperature limits specified for most anion resins.
- Polymer Structure: Styrene/DVB
- Polymer Type: Gel
- Physical Form: Spherical Beads
- Ionic Form as Shipped: Hydrogen/Hydroxide
- Column Capacity: >0.60 meq/mL
- Volume Ration Cation/Anion: 40/60 percent
- Water Retention: 55 to 60 percent
- Approximate Shipping Weight: 43 lbs per cu. ft.
- Screen Size Distribution (US Mesh): 16 to 50
- Resin Color
- Cation: Brown to black
- Anion: Amber
Suggested Operating Conditions
- Maximum Continuous Temperature: 140°F
- Maximum Intermitten Temperature: 180°F
- Minimum Bed Depth: 24 Inches
- Backwash Expansion: 50 to 100 percent
- Maximum Pressure Loss: 25 psi
- Operating pH Range: 2 to 12 SU
- Service Flow Rate
- Working: 1 to 5 gpm per cu. ft.
- Polishing: 3 to 15 gpm per cu. ft.
