Free Shipping May Not Apply - If Shipping Adjustments Are Made, You Will Be Notified Before Package Is Sent To You
ResinTech CG8-H-BL 8% Crosslinked Cation Exchange Resin, H Form, Black Color, 1 Cubic Foot
ResinTech CG8 is a dark colored 8% cross linked gel strong acid cation resin. CG8 is a workhorse cation resin optimized for industrial and residential applications that require good regeneration efficiency and oxidative stability. ResinTech CG8-BL is intended for use in all industrial and commercial softening applications as well as residential applications that have moderate amounts of chlorine in the feedwater. CG8-H-BL is intended for use in demineralizes and in mixed beds.
Features & Benefits
- Industrial Softening and Demineralizing Applications: 8% DVB cross linking is ideal for most industrial applications
- Low Color Thow
- Superior Physical Stability: 93% plus sphericity and high crush strengths together with carefully controlled particle distribution provides long life and low pressure drop
- Complies With US FDA Regulations: Conforms to paragraph 21CFR173.25 of the Food Additives Regulations of the US FDA
Applications:
- Softening: ResinTech CG8-BL is an 8% crosslinked cation resin optimized for residential and commercial applications.
- Demineralization: ResinTech CG8-BL can be used as the cation component in a separate bed and mixed bed demineralization applications where a hydrogen form cation resin is coupled with a hydroxide form anion resin. Regeneration is accomplished with stepwise sulfuric acid or with hydrochloric acid.
- Iron Removal: CG8-BL has good capacity for ferrous iron. Iron content in the feed water should not be more the 1 mg/L Fe per each 17 mg/L of hardness.
- Ammonia Removal: ResinTech CG8-BL is slightly selective for ammonia compared to sodium but hardness is much more preferred. Ammonia is not ionized at pH above 9 and is not well removed when the pH is significantly alkaline
- Polymer Structure: Styrene/DVB
- Polymer Type: Gel
- Functional Group: Sulfonic Acid
- Physical Form: Spherical Beads
- Ionic Form as Shipped: Sodium
- Column Capacity: >2.0 meq/mL
- Water Retention: 42 to 49 percent
- Approximate Shipping Weight: 52 lbs per cu. ft.
- Screen Size Distribution (US Mesh): 16 to 50
- Maximum Fines Content (< 50 mesh): 1%
- Minimum Sphericity: 93%
- Uniform Coefficient: 1.6 approx.
- Resin Color: Brown to Black
Suggested Operating Conditions
- Maximum Continuous Temperature: 280°F
- Minimum Bed Depth: 24 Inches
- Backwash Expansion: 25 to 50 percent
- Maximum Pressure Loss: 25 psi
- Operating pH Range: 0 to 14 SU
- Regenerant Concentration:
- Hydrogen Cycle: 5 to 10% HCl
- Hydrogen Cycle: 1 to 8% H2SO4
- Salt Cycle: 10 to 15 % NaCl
- Regenerant Level: 4 to 15 lbs per cu. ft.
- Regenerant Flow Rate: 0.5 to 1.5 gpm per cu. ft.
- Regenerant Contact Time: > 20 minutes
- Displacement Flow Rate: Same as dilution water
- Displacement Volume: 10 to 15 gallons per cu. ft.
- Rinse Flow Rate: Same as service flow
- Rinse Volume: 35 to 60 Gallons per cubic foot
- Service Flow Rate: 1 to 10 gpm per cubic foot
