Pura 15910311 UV-1 EPCB UV System, 1 GPM, 12 VDC with 0.5 Micron Filter
This Pura UV-1 system is rated for 1 gallon per minute and uses a 0.5 micron carbon filter for pre-filtration. The small under the sink system combines both ultraviolet disinfection with carbon filtration all in a very attractive and compact design.
- Perfect for a single faucet, water fountain or low-flow application
- "Entry level" point-of-use UV system for recommended flow rates up to 1 GPM (4 lpm)
Features
- Water Disinfection
- Water Disinfection
- Easy to change lamp and filters
- Lamp and ballast matched for quality assurance
- Simple installation
These systems are for the supplemental treatment of disinfected drinking water which has been treated or other drinking water which has been tested and deemed acceptable for human consumption by the state or local health agency having jurisdiction. These systems are designed to reduce normally occurring non-pathogenic nuisance organisms and is not intended for the treatment of contaminated water. The contaminants and other substances reduced by this water treatment device are not necessarily in your water. In addition, the presence of certain contaminants in your drinking water does not necessarily pose a health risk.
Specifications & Performance- Model: UV1-ECP
- # of Sumps: 1
- Sump Type: #10 SL
- Sump Content: EPCB Carbon/UV
- Lamp #: #10
- Power Used: 10 Watts
- Voltage: 12 VDC
- Flow Rate: 1 GPM
- Dimensions: 13.5" x 5" x 5"
- Shipping Weight: 7 lbs
- Inlet/Outlet Size: 1/2" NPT
Feed Water Supply
- Feed Water Pressure: 20-75 PSI (Must not exceed 75)
- Feed Water Temperature: 38° - 106° F
- pH Range: 6.5-9.5
- Total Dissolved Solids: < 1500 mg/L
- Total Suspended Solids: < 10 mg/L
- Turbidity: < 5 NTU
- Hardness: < 120 (7 GPG)
- Iron: < 0.3 mg/L
- Manganese: < 0.05 mg/L
