Pentek 655148, DFX-CB-20 Diamond Flow Polyspun/Carbon Block, 2.5" x 20"
- High dirt-holding capacity maximizes utilization of the carbon block
- Chlorine taste & odor reduction combined with superior sediment reduction
- Rated at 10 microns
- Low pressure drop
- Twice as resistant to particulate plugging than standard carbon blocks
DFX Series Diamond Flow cartridges are a unique, premium cartridge that utilizes several of the Pentair core competencies by merging technologies into one cartridge in order to bring customers a quality product. Diamond Flow Series Cartridges offer the effective chlorine taste & odor reduction found in traditional Pentek carbon blocks, joined with the superior sediment reduction to resist premature plugging. These dual purpose cartridges are well-suited for a wide range of applications.
NOTE: Filters Will Contain a Very Small Amount of Carbon Fines (Very Fine Black Powder) and a New Filter After Installation Should be Flushed with Sufficient Water to Remove the Fines >From Your Water System Before Using the Water
- Temperature Rating: 40 °F to 125 °F (4.4 °C to 51.7°C)
- Micron Rating: 10 micron
- Chlorine Taste & Oder Reduction @ Flow Rate: 5,000 Gallons @ 2 gpm* (18,927 liters @ 7.6 L/min)
- Max Dimensions: 2.89" x 20.035" (73.406mm x 508.89mm)
- Initial ?P (psi) @ Flow Rate (gpm): 1.0 psi @ 2 gpm (0.07 bar @ 3.8 L/min)
- NSF 42 Approved for Material requirements only
- Standard 6 Filters per Case
- Max Dimensions: 2.89" x 20.035" (73.406mm x 508.89mm)
- Initial ?P (psi) @ Flow Rate (gpm): 1.0 psi @ 2 gpm (0.07 bar @ 3.8 L/min)
- NSF 42 Approved for Material requirements only
- Standard 6 Filters per Case
* Based on Manufacturer's Internal Testing