Pentek 255669-43, ELPC-20 Electroplating Cartridge, 2.88" x 20"
• The ELPC series is a premium line of activated carbon filter specifically designed for electroplating solutions
• ELPC series products have a seven micron nominal rating with superior dirt holding ability due to the fibrous physical structure and manufacturing process that results in a product with true depth filtration
• This depth filtration will allow for maximum treatment with minimum pressure drop through the cartridge
• Cellulose-free construction
• Resistant to chemical breakdown in both acidic and alkaline solution up to 180°F (82°C)
• Will not contribute to plating porosity or brittleness
• Integrated post filtration layer to ensure that no carbon fines are bled into the plating bath
• End cap gaskets are permanently molded onto the end caps to ease inchange-out of filter cartridges (gaskets cannot fall off into the filter housing during installation or removal of filters)
• Dimensions: 2-7/8" x 20" (73 mm x 508 mm)
• Micron Rating (Nominal): 7 microns
• Temperature Rating: 40-180°F (4.4-82.2°C)
• Initial ?P (psi) @ Flow Rate (gpm): 3.4 psi @ 2.0 gpm (0.2 bar @ 7.6Lpm)
• Filter Media: Advanced Bonded PAC
• End Caps: Polypropylene
• Netting: Polyethylene
• Gasket: Santoprene
• Standard 30 Filter/Case
