Pentek 255668-43, ELPC-10 Electroplating Cartridge, 2.5'' x 10''

Brand: Pentek

(No reviews yet) Write a Review
MSRP: $20.80
Your Price: $14.98
(You save $5.82 )
Quantity Price
1-14 $14.98
15-29 $13.93
30-59 $13.48
60+ $13.03
Adding to cart… The item has been added
Typically Ships in 1-2 Weeks
Technical Downloads
Pentek 255668-43, ELPC-10 Electroplating Cartridge, 2.5" x 10"

• The ELPC series is a premium line of activated carbon filter specifically designed for electroplating solutions
• ELPC series products have a seven micron nominal rating with superior dirt holding ability due to the fibrous physical structure and manufacturing process that results in a product with true depth filtration
• This depth filtration will allow for maximum treatment with minimum pressure drop through the cartridge
• Cellulose-free construction
• Resistant to chemical breakdown in both acidic and alkaline solution up to 180°F (82°C)
• Will not contribute to plating porosity or brittleness
• Integrated post filtration layer to ensure that no carbon fines are bled into the plating bath
• End cap gaskets are permanently molded onto the end caps to ease inchange-out of filter cartridges (gaskets cannot fall off into the filter housing during installation or removal of filters)


***ELPC-10 WILL NOT FIT #10 SLIM LINE OR #10 STANDARD HOUSINGS


• Dimensions: 2-7/8" x 9-3/4" (73 mm x 248 mm)
• Micron Rating (Nominal): 7 microns
• Temperature Rating: 40-180°F (4.4-82.2°C)
• Initial ?P (psi) @ Flow Rate (gpm): 3.4 psi @ 1.0 gpm (0.2 bar @ 3.8 Lpm)

   
• Filter Media: Advanced Bonded PAC
• End Caps: Polypropylene
• Netting: Polyethylene
• Gasket: Santoprene

• Standard 30 Filters/Case
Weight:
0.80 LBS
Width:
3.00 (in)
Height:
10.00 (in)
Depth:
3.00 (in)