Pentek 150512, 3/4" In/Out, #12 Standard All Natural "White" w/ Mounting Bracket Cap, With 222 Cartridge Sealing Cap and Double Cap Plugs
All natural filter housings help maintain high standards of purity and performance required in critical contamination control systems and processes. These housings can alose be used for a variety of other applications where purity, quality, filtration and economy are required.
• All housings have 3/4" (19mm) NPT inlet and outlet threads
• Compatible with most Pall, Millipore, Gelman, Brunswick, Satorius, Filterite and Nuclepore membrane cartridges
• All Natural "White" Housing
• #12 Housing, 12" Long
• 3/4” NPT Inlet / Outlet
• With double cap plugs
• 222 Cartridge Sealing Cap
• All Natural "White" Sump with all natural "white" Cap
• An economical solution to fluoropolymer, stainless steel or Teflon housings
• Pure polypropylene components - no fillers, colorants, plasticizers or lubricants
• Ultra smooth contact surfaces prevent bacterial adhesion and build-up
• Resists DI water and other inorganic solutions
• Viton o-rings provide dependable sealing
• Standard 1 Housings per Case
Applications
• Deionized and reagent grade water
• Electronic grade chemicals (see chemical compatibilty chart below)
• Reagent grade chemicals
• Pharmaceutical grade solvents
• Reaction solvents for cosmetic, pharmaceutical, or polyester productions
• Freons (TF, 113)
• Electronic etching solutions
• Magnetic coatings (tape, disc, card)
• Reverse osmosis or ultrafiltration final filters
Materials of Construction
• Housing: All Natural Polypropylene
• Cap: All Natural Polypropylene
• O-Ring: Viton
• Max. Temp: 100 °F (37.8 °C)
• Max Pressure: 100 psi (6.9) bar
Caution: Do not install where system will be exposed to direct sunlight
Caution: Protect against freezing to prevent cracking of the filter and water leakage
Housing Specifications and Performance Data
| Model | Cartridge Sealing | Maximum Dimensions | Inital Pressure Drop (psi) @ Flow rate (gpm) |
| #10 | DOE | 12-1/2" x 5-1/8" | 1 psi @ 10 gpm |
| #12 | 222 | 15-3/8" x 5-1/8" | 1 psi @ 10 gpm |
| #20 | DOE, 222 | 29-1/8" x 5-1/8" | 1 psi @ 10 gpm |
| Pure Poly | PVDF | ||||
| Semiconductor Processing Materials | 68 °F (20 °C) | 140 °F (60 °C) | 68 °F (20 °C) | 140 °F (60 °C) | Viton |
| Acetic Acid 99.7% (135 °F/51.7 °C Max) | R | C | R | R | NR |
| Acetic Acid 50% | R | R | NR | R | R |
| Acetone 99.5% | R | R | R | NR | NR |
| Ammonium Fluoride 40% | R | R | R | R | R |
| Ammonium Hydroxide 10% | R | R | R | R | R |
| Hydrochloric Acid 37% | R | R | R | R | R |
| Hydrofluoric Acid 49%, 52% | R | R | R | R | R |
| Hydrogen Peroxide 50% | R | C | R | R | R |
| Methanol 99.9% (140 °F/60 °C Max) | R | R | R | R | NR |
| Methylene Chloride 99.8% (105°F/40.6°C Max) | R | NR | R | NR | R |
| Methyl Ethyl Ketone | R | C | NR | NR | NR |
| N-Butyl Acetate 99.0% | NR | NR | C | NR | NR |
| Nitric Acid 60% | R | NR | R | C | R |
| Phosphoric Acid 86% | R | R | R | R | R |
| Potassium Hydroxide 45% | R | R | R | R | NR |
| 2-Propanol 99.5% | R | R | R | C | R |
| Sodium Hydroxide 50% | R | R | R | R | R |
| Sulfuric Acid 90% | R | R | R | R | R |
| Tetrachloroethylene | NR | NR | R | R | R |
| Water-Deionized | R | R | R | R | R |
