Pentek 150150, 3/4" In/Out, #10 Standard All Natural DOE w/ Mounting Bracket Cap
All natural filter housings help maintain high standards of purity and performance required in critical contamination control systems and processes. These housings can alose be used for a variety of other applications where purity, quality, filtration and economy are required.
• All housings have 3/4" (19mm) NPT inlet and outlet threads
• Compatible with most Pall, Millipore, Gelman, Brunswick, Satorius, Filterite and Nuclepore membrane cartridges
• All Natural Housing
• #10 Housing, 10" Long
• 3/4” NPT Inlet / Outlet
• All Natural Sump with all natural Cap
• An economical solution to fluoropolymer, stainless steel or Teflon housings
• Pure polypropylene components - no fillers, colorants, plasticizers or lubricants
• Ultra smooth contact surfaces prevent bacterial adhesion and build-up
• Resists DI water and other inorganic solutions
• Viton o-rings provide dependable sealing
• Standard 1 Housings per Case
Applications
• Deionized and reagent grade water
• Electronic grade chemicals (see chemical compatibilty chart below)
• Reagent grade chemicals
• Pharmaceutical grade solvents
• Reaction solvents for cosmetic, pharmaceutical, or polyester productions
• Freons (TF, 113)
• Electronic etching solutions
• Magnetic coatings (tape, disc, card)
• Reverse osmosis or ultrafiltration final filters
Materials of Construction
• Housing: All Natural Polypropylene
• Cap: All Natural Polypropylene
• O-Ring: Viton
• Max. Temp: 100 °F (37.8 °C)
• Max Pressure: 100 psi (6.9) bar
Caution: Do not install where system will be exposed to direct sunlight
Caution: Protect against freezing to prevent cracking of the filter and water leakage
Housing Specifications and Performance Data
| Model | Cartridge Sealing | Maximum Dimensions | Inital Pressure Drop (psi) @ Flow rate (gpm) |
| #10 | DOE | 12-1/2" x 5-1/8" | 1 psi @ 10 gpm |
| #12 | 222 | 15-3/8" x 5-1/8" | 1 psi @ 10 gpm |
| #20 | DOE, 222 | 29-1/8" x 5-1/8" | 1 psi @ 10 gpm |
| Pure Poly | PVDF | ||||
| Semiconductor Processing Materials | 68 °F (20 °C) | 140 °F (60 °C) | 68 °F (20 °C) | 140 °F (60 °C) | Viton |
| Acetic Acid 99.7% (135 °F/51.7 °C Max) | R | C | R | R | NR |
| Acetic Acid 50% | R | R | NR | R | R |
| Acetone 99.5% | R | R | R | NR | NR |
| Ammonium Fluoride 40% | R | R | R | R | R |
| Ammonium Hydroxide 10% | R | R | R | R | R |
| Hydrochloric Acid 37% | R | R | R | R | R |
| Hydrofluoric Acid 49%, 52% | R | R | R | R | R |
| Hydrogen Peroxide 50% | R | C | R | R | R |
| Methanol 99.9% (140 °F/60 °C Max) | R | R | R | R | NR |
| Methylene Chloride 99.8% (105°F/40.6°C Max) | R | NR | R | NR | R |
| Methyl Ethyl Ketone | R | C | NR | NR | NR |
| N-Butyl Acetate 99.0% | NR | NR | C | NR | NR |
| Nitric Acid 60% | R | NR | R | C | R |
| Phosphoric Acid 86% | R | R | R | R | R |
| Potassium Hydroxide 45% | R | R | R | R | NR |
| 2-Propanol 99.5% | R | R | R | C | R |
| Sodium Hydroxide 50% | R | R | R | R | R |
| Sulfuric Acid 90% | R | R | R | R | R |
| Tetrachloroethylene | NR | NR | R | R | R |
| Water-Deionized | R | R | R | R | R |
