CPF PTFE Membrane Cartridge, 0.05 Micron Rating, GTM-05, General Grade

GTM grade PTFE cartridges are designed for general purpose use wherever a cost effective PTFE membrane filter is required. Manufactured with inherently hydrophobic PTFE membrane, these cartridges are designed for use in the filtration of aggressive solvents, and as compressed gas and vent filters. These cartridges are found in the manufacturing processes of pharmaceutical companies, semi-conductor manufacturers and bulk chemical companies. the cartridge surface area, filter core design, pleat configuration and pleat packing density have been optimized to provide increased cartridge life resulting in lower filtration operating costs. Each cartridge is module and integrity tested.

Maximum Operating Parameters

• Micron Rating: 0.05 Micron

• Operating Temp: 180°F (82°C) at 10 psid (0.69 bar) in water
• Forward Differential Pressure: 50 psi (3.4 bar) at 20°C
• Reverse Differential Pressure: 40 psi (2.7 bar) at 20°C

• Recommended Change Out Pressure: 35 paid (2.4 bar)

Dimensions 

• Length: 5 to 40" (12.7 101.6 cm) nominal
• Outside Diameter: 2.75" (7.0 cm) nominal
• Surface Area: 7.0 ft² (0.65 m²) Per 10" length

Applications
Final Filtration of:

• Compressed Air                      • Pressurized Gases
• Solvents                                  • Tank Ventilation