Harmsco WBCB-975, 10 Micron WatterBetter® Carbon Block Cartridge
Carbon block cartridges for taste, odor, and chlorine reduction
- High Chlorine Reduction
- Low initial pressure drops
- Excellent contaminant reduction
- No release of carbon fines
- High dirt holding capacity
- No channeling or bypass
- Long cartridge life
Features
- 100% coconut shell carbon
- Made with unique binders
- Dual stage depth filtration
- High porosity design
- 10 micron filtration
- FDA approved components
- Radial flow design
Applications
- Drinking Water - Point of Entry Residential Filtration
- Marine/Aquatic Filtration - Point of Use Residential Filtration
- Food & Beverage Filtration - Water Bottling Filtration
- Industrial Water Filtration - Science/Laboratory
- Reverse Osmosis Pre-Filtration - Photo Chemical Plating Solutions
Performance - Performance claims are based on independent lab results and manufacturer's internal test data. Actual performance is dependent on influent water quality, flow rates, system design and applications. Your results may vary. Performance data has not been tested or validated by NSF.
Micron Ratings - Micron ratings are based on 85% or greater removal of the stated nominal micron rating
Capacity - Estimated capacity based on using 2 ppm free chlorine with greater than 90% reduction
Cartridges (new) - Flush new cartridges until water runs clear prior to use
| Nominal Micron Rating | 10 Microns |
| Chlorine, Taste, Odor Reduction Capacity @ Flow (GPM) | > 8,000 Gallons @ 1 GPM |
| Chlorine, Taste, Odor Reduction Capacity @ Flow (LPM) | > 30,000 Liters @ 3.8 LPM |
| Initial Pressure Drop @ Flow Rate (GPM) | 2.6 psi @ 1 GPM |
| Initial Pressure Drop @ Flow Rate (LPM) | .18 bar @ 3.8 LPM |
| Filter Dimension | 2-3/4" OD x 9-3/4" H |
| Carbon | Coconut Shell PAC |
| End Caps | Polypropylene |
| Inner/Outer Wraps | Polypropylene |
| Nettings | Polypropylene |
| Gaskets | NBR |
| Temperature Rating | 40° F (4°C) to 180°F (82°C) |
