Harmsco HMB-6-FL Multi Bag Housing, 1,200 GPM
Features
- 304 stainless steel construction, standard
- 304 stainless steel perforated baskets, standard
- 150 psi (10.3 bar) pressure rating
- Built to ASME design standards
- Bead blast finish, standard
- Designed to accept standard #2 Snap Fit "V" ring or steel ring bands
- Two gauge ports - inlet and outlet sides
- Assisted davit arm with eye-nut closure
- Maunfactured in the USA
Options
- AMSE Code U-stamp
- 316 Stainless Steel Construction
Applications
- Paint
- Paint
- Process water
- Plating solutions
- Coatings
- Industrial waste water treatment
- Lubricants
- Solvents
- Hydraulic Fluids
- Cutting Fluids
- Ground water remediation
Specifications
- Finish: Bead blast
- Finish: Bead blast
- Inlet/Outlet: Flange connections
- Construction: 304 SS, built to ASME standards
- Pressure: Up to 150 psi (10.3 bar) max
- Closure: O-Ring housing seal with swing bolt closure
- Temperature: Up to 250°F (121°C), filter housing only
| Filter Model | HMB-6-FL |
| Max Flow Rate* (GPM) | 1,200 |
| Max Flow Rate* (LPM) | 4,542 |
| Max Flow Rate* (M3/Hr)) | 273 |
| Filter Height | 67-1/2" |
| Width | 39" |
| Diameter | 16-1/2" |
| Inlet/Outlet Height | 6" |
| I/O Size | 6" Flange |
| Drain | 2" NPT |
| Bag Size | #2 |
| Basket Depth | 30" |
| Weight (lbs) | 990 |
* Flow rates shown above are for guidelines only. Actual flow rates are based on cartridge type, micron rating, viscosity, solids content and other factors. For complete flow and pressure drop information please refer to your cartridge manufacturer guidelines.
