Harmsco HC-170-AC-5, 5 Micron Premium Carbon Cartridge
Designed for Hurricane® and WaterBetter® Filter housings
Activated Carbon cartridges for Hurricane® and WaterBetter® filter housings - featuring 5 micron nominal pre-filtration. The industry's largest carbon block cartridge.
- High Chlorine Removal
- High THM's removal
- Lower initial pressure drops
- Reduced maintenance down time and cost
- Longer filter runs for fewer change-outs
- Increased contaminant removal - Taste, odors and DPB's
- Install and easy to clean
Reduces PFOS / PFOA in Drinking Water
- Independently tested to reduce PFAS/PFOS and PFOA in drinking water
- Independently tested to reduce PFAS/PFOS and PFOA in drinking water
- NSF STD 473 Raded for PFOS and PFOA Reduction
- NSF / ANSI / CAN Standard 61 Rated
- Nominal Micron Rating - 5 Micron
- Maximum Flow Rate for PFAS/PFOS / PFOA Removal - 15.0 gpm
- Capacity for PFAS/PFOS / PFOA Removal - 90,000 gallons
Features
- High performance extruded activated carbon block technology
- Integrated 5 micron pleated pre-filter for extended life
- Three sizes for greater media surface area
- Low initial pressure drop compared to granular activated carbon (no channeling)
- Patented Dual Durometer end caps to ensure better sealing
- Engineered media for superior performance
- Cleanable and reusable in most application
- DBP (disinfection by-product) Tested
Applications
- Commercial/Residential Drinking Water Filtration - Industrial Waste Water Treatment
- Reverse Osmosis Pre-Filtration - Environmental Filtration
- Water Bottling Filtration - Industrial/Commercial Process Water
- Point of entry for the dwelling
Each Cartridge is individually shrink wrapped and boxed for protection
| Nominal Micron Rating | 5 Microns |
| Media (sq ft) | 90 |
| Rec. Flow Rate (GPM) | 15 |
| Min. Carbon Content (lbs)* | 10 |
| Capacity | 270,000 gallons |
| Chlorine Reduction | 90-95% at 15 GPM |
| THM's Reduction | 95-98% at 15 GPM |
| Filter Dimension | 7-3/4" OD x 30-3/4" H |
| End Caps | Plastisol (pliable PVC) Dual Durometer |
| Center Tubes | PVC, rigid and perforated |
| Temperature | 125°F (52°C) |
| Carbon | High performance extruded activated carbon block |
| Outer Layer | 5 Micron nominal pleated Polyester-Plus™ media |
| Directional Flow | Radial (outside to in) for low pressure drop |
