GF Signet P5251 Metalex Paddlewheel Flow Sensor, SS, 1/2" - 1" Socket Weld
The Signet 525 Metalex Paddlewheel Flow Sensor combines stainless steel construction with insertion paddlewheel technology. The result is a highly reliable sensor suitable for operation at extreme pressures and temperatures. The tungsten carbide shaft and carbon fiber reinforced PTFE bearing provides excellent wear resistance for extended service.
A comprehensive fitting program allows installation in steel lines with the mini-block for small diameters, and either the mini-tap or saddle for pipes up to 12". The self-generating output signal allows use with the batter operated flow totalizer 8150.
Features:
- For up to 103 bar (1500 psi @ safety factor 1.5) pressure
- For up to 300°F (149°C) temperature
- 1/2" to 12" pipe range (DN15 to DN300)
- Simple installation
- Self-powered/no external power required
- 316 SS Body
- Tungsten carbide or SS shaft
- 25ft cable included
- Operating range 1.6 to 20 ft/s (0.5 to 6 m/s)
Applications:
- Boiler Feedwater monitoring
- HVAC
- Chemical Transport
- Heat exchangers
- Reverse osmosis
- Cooling Systems
- Not Suitable for gases
Specifications- For up to 300°F (149°C) temperature
- 1/2" to 12" pipe range (DN15 to DN300)
- Simple installation
- Self-powered/no external power required
- 316 SS Body
- Tungsten carbide or SS shaft
- 25ft cable included
- Operating range 1.6 to 20 ft/s (0.5 to 6 m/s)
Applications:
- Boiler Feedwater monitoring
- HVAC
- Chemical Transport
- Heat exchangers
- Reverse osmosis
- Cooling Systems
- Not Suitable for gases
- Sensor Body: 316SS
- Sensor Rotor: 17-4PH-1 Stainless Steel
- Pin Material: Tungsten Carbide GRP1 or 316 SS
- Gasket: KLINGER sil C-4401 (supplied with fitting)
- Operating Range: 1.6 to 20 ft/s
- Pipe Size: 1/2" to 1" socket-weld mini-tap fittings
- Max Temperature/Pressure Rating: 1500 psi @ 149°C
- Operating Temperature: 0-300°F
