Enpress POLY-UF-C Ultrafiltration System, 0.02 Micron
The Enpress Poly-UF offers 0.02 micron filtration at service flow rates up to 12 GPM. Utilizing Enpress' patented and industry exclusive liner design, the internal UF module treats colloids, bacteria, cysts, viruses, turbidity, tannins and other particles down to 0.02 micron size. The high surface ares UF bundles require normal line pressure to operate, low waste discharge when in back-wash/cleaning mode, and offer low pressure drop with high service flow rates.
The Enpress Poly-UF can be utilized as a final polishing stage or on water reclamation systems for Rainwater or Grey water, along with offering protection during power outages and intermittent power. The membrane is NSF 61 certified, and the system is BioVir certified and tested for log reduction. The vessel also comes standard with a bottom drain opening for ease of drainage and cleaning purposes of the tank system.
Applications
- Grey Water and Rainwater use, catchment and recycling
- Tannin Removal
- RO Pre-filter
- Polishing post filter filtration
- Colloid removal
- Bacteria, cyst and virus removal
Filtration Level- 0.02 micron
- Operating Temperature: 35 to 100 °F
- Operating Pressure: 10 to 100 psi
- Continuous Flow Rate: 10 GPM
- The system provides a treated flow of up to 12 GPM and 60 PSI
- Membrane is NSF 61 Certified
- Raw Water Specifications
- Pre-Filtration: 5 microns or less
- Chlorine: 1.0 ppm maximum for continuous flow (up to 2000 ppm for cleaning only)
- Iron: less than 0.30 ppm
- Manganese: Less than 0.05 ppm
- Silt density index; Less than 6.0
- pH: 3 to 11
Technical Information
- Backflush: Once per day (5 minutes at 0.7 to 2 gpm)
- Drain flush: Once per week (2 minutes at 5 gpm)
Controller
- Uses the Clack C-Series control head
- Standard In/Out Size: 3/4" MPT
