Dow Filmtec Sea Water Element, SW30XHR-440i, 6,000 GPD
Dow Filmtec SW30XHR-440i is the highest rejection seawater element in the Filmtec element range, enabling stringent water quality requirements to be met with single pass seawater systems in most situations. This come with the highest productivity available and enables systems to be designed to deliver the lowest cost of water by optimizing energy consumption, system productivity and operating flux. The SW30XHR-440i can be effectively be used in permeate staged seawater desalination systems without impairing the performance of the downstream stage. Very high NaCl and boron rejection to meet World Health Organization and other drinking water standards more cost effectively.
- Model: SW30XHR-440i
- Diameter: 8"
- Length: 40"
- Hard fiberglass outer shell
- Applied Pressure: 800 PSI
- Nominal Capacity: 6,600 Gallons Per Day
- Maximum Pressure: 1200 PSI
- Weight: 40 lbs
- Stabilized salt rejection: 99.82%
- Stabilized boron rejection: 93%
- 28 mil feed spacer
- Max. Operating Temperature: 113°F (45°C)
- Max Pressure Drop: 15 PSI
- 440 ft2 of active membrane surface area
- Include iLEC interlocking end caps
- May Be cleaned over the widest pH range (pH 1-13) for the most effective cleaning
Used In:
- Seawater desalination
- Municipal drinking water
- Industrial desalination
Advantages:
- High flux reduces energy used and pressure required
- Good rejection provides good water quality
- Filmtec performance and quality
