Charged Nylon Membrane Cartridge, 0.45 Micron Rating
General Service Grade, Positively Charged Nylon 6,6 Membrane Filter Cartridges are designed for general purpose use wherever a fluid contains negatively charged contaminants and a plated membrane filter is required. Designed to hold the maximum amount of filter media that can be completely and effectively utilized in a cartridge, GNC filters lower the cost of filtration. GNC cartridges are flushed with 17+ MegOhm water to remove potential extraneous manufacturing debris.
Applications
Filtration of:
Filtration of:
• Process Water • Inks & Dyes
• DI Water • Solvents
• Chemicals
Maximum Operating Parameters
• Micron Rating: 0.45 Micron
• Maximum Operating Temperature*: 180°F (82°C) at 10 psid in water
• Forward Differential Pressure: 50 psi (3.4 bar) at 20°C
• Reverse Differential Pressure: 40 psi (2.7 bar) at 20°C
• Recommended Changeout Pressure: 35 psid (2.4 psid)
• Micron Rating: 0.45 Micron
• Maximum Operating Temperature*: 180°F (82°C) at 10 psid in water
• Forward Differential Pressure: 50 psi (3.4 bar) at 20°C
• Reverse Differential Pressure: 40 psi (2.7 bar) at 20°C
• Recommended Changeout Pressure: 35 psid (2.4 psid)
Construction Materials
• Filtration Media: Dual Layered: Positively Charged 6,6 Membrane (absolute rated)
• Filtration Media Support: Polypropylene
• End Caps: Polypropylene
• Center Core: Polypropylene
• Outer Support Cage: Polypropylene
• Filtration Media: Dual Layered: Positively Charged 6,6 Membrane (absolute rated)
• Filtration Media Support: Polypropylene
• End Caps: Polypropylene
• Center Core: Polypropylene
• Outer Support Cage: Polypropylene
• Sealing Method: Thermal Bonding
Dimensions
• Length: 5 to 40" (12.7 101.6 cm) nominal
• Outside Diameter: 2.75" (7.0 cm) nominal
• Surface Area: 7.0 ft2 (0.65 m2) Per 10" length
Sanitization
• Filtered Hot Water: 194°F, 30 minutes, multiple cycles, max 3 psid forward flow
• Autoclave: 250°F, 30 min, multiple cycles
• In-line Steam: 275°F, 30 min, multiple cycles
• Filtered Hot Water: 194°F, 30 minutes, multiple cycles, max 3 psid forward flow
• Autoclave: 250°F, 30 min, multiple cycles
• In-line Steam: 275°F, 30 min, multiple cycles