Blue-White A1N30V-3T-P Peristaltic Chemical Feed Pump, 32.6-326 mL/min
Digital Variable Speed Unit
- Output: 32.6-326 mL/min
- Output Pressure: 50 PSI
- Two pump tubes supplied with each pump, No extra tubing required
- Peristaltic pump design does not have valves than can clog requiring maintenance
- Self Priming - even against maximum line pressure. By-pass valves are not required. Cannot vapor lock of lose prime
- Output volume is not effected by changes in back pressure
- Patented pump tube design installs easily and stays centered on the rollers without manual adjustment
- Accepts 4-20 mA, 0-10 VDC and pulse inputs for manual or external speed control
- Operator friendly digital touch pad
- Easy to read LCD display
- Service and alarm indicator icons
- Display motor speed or input signal values
- Prime mode for easy priming without changing programming
- Built in Tube Detection Plus System (TFD+). Senses chemical in the pump head, shuts off the pump and activates a 1 amp alarm relay (dry contact closure)
- Compatible with Blue-White's output flow verification sensor system
- Durable housing of chemical resistant Valox (PBT) thermoplastic
Peristaltic injectors are well suited to metering chemicals that could foul heads with conventional check valves. Peristaltic pumps have rollers that compress the tube in a progressive squeezing action.
Blue-White's superior FLEXFLO peristaltic injectors have an impressive edge over the competition. Only FLEXFLO pumps feature Blue-White's superior patented pump tube design. It's easy to install, and doesn't need to be manually advanced.
All FLEXFLO Peristaltic pumps are equipped with Blue-White's exclusive patented Tube Failure Detection System. No other manufacturer can offer this feature.
NEW & IMPROVED PUMP HEAD & TUBE DESIGN
- Easy Reorder: Tube assemblies are now stamped with the simple reorder number
- Increased Performance: Circumference of new pump head is more accurate, allowing for more accurate feed rats. Larger internal adapter ports will handle higher viscosity fluids
- Increased Strength: A strong pump head and adapter plate ensures adapters are secured in place. Tougher more durable tube adapters are manufactured of natural PVDF.
A-100 Specifications
- Feed Rate: 32.6-326 mL/min
- RPM: 60
- Max PSI: 50
- Pump Tube Part Number: A1-3T
- Pump Tube Material: Tygothane
- Max Fluid Temperature: 130°F
- Ambient Temp. Range: 14° to 110°F
- Output Adjustment Range:
- 14 & 30 RPM with -1T, -2T tubes: 5-100% (20:1 turndown)
- All other models: 10-100% (10:1 turndown)
- Max Viscosity: 5,000 Centipoise
- Max. Suction Lift: 30 ft Water 0 psig
- Duty Cycle: Continuous
- Max. Solids: 50% by volume
- Amperage draw:
- 115V/60 Hz (A-100NFP = .513; A-100NVP = .350 amp max)
- 230V/60 Hz (A-100NFP = .563; A-100NVP = .173 amp max)
- 220V/50 Hz (A-100NFP = .660; A-100NVP = .175 amp max)
- 240V/50 Hz (A-100NFP = .585; A-100NVP = .193 amp max)
- Power cord plug type:
- 115V/60 Hz = NEMA 5/15 (USA)
- 230V/60 Hz = NEMA 5/15 (USA)
- 220V/50 Hz = CEE 7/VII (Europe)
- 240V/50 Hz = AS 3112 (Australia/New Zealand)
- Injection fitting O-Ring Seals: FKM and TFE/P (Optional EP)
- Product Dimensions:
- A-100NFP = 6" H x 9-3/8" W x 9-1/8" D
- A-100NVP = 6" H x 9-1/2" W x 9-1/8" D
- Approximate Shipping Weight: 12 lbs.
Weight:
12.00 LBS
Digital Variable Speed Unit
- Output: 32.6-326 mL/min
- Output Pressure: 50 PSI
- Two pump tubes supplied with each pump, No extra tubing required
- Peristaltic pump design does not have valves than can clog requiring maintenance
- Self Priming - even against maximum line pressure. By-pass valves are not required. Cannot vapor lock of lose prime
- Output volume is not effected by changes in back pressure
- Patented pump tube design installs easily and stays centered on the rollers without manual adjustment
- Accepts 4-20 mA, 0-10 VDC and pulse inputs for manual or external speed control
- Operator friendly digital touch pad
- Easy to read LCD display
- Service and alarm indicator icons
- Display motor speed or input signal values
- Prime mode for easy priming without changing programming
- Built in Tube Detection Plus System (TFD+). Senses chemical in the pump head, shuts off the pump and activates a 1 amp alarm relay (dry contact closure)
- Compatible with Blue-White's output flow verification sensor system
- Durable housing of chemical resistant Valox (PBT) thermoplastic
Peristaltic injectors are well suited to metering chemicals that could foul heads with conventional check valves. Peristaltic pumps have rollers that compress the tube in a progressive squeezing action.
Blue-White's superior FLEXFLO peristaltic injectors have an impressive edge over the competition. Only FLEXFLO pumps feature Blue-White's superior patented pump tube design. It's easy to install, and doesn't need to be manually advanced.
All FLEXFLO Peristaltic pumps are equipped with Blue-White's exclusive patented Tube Failure Detection System. No other manufacturer can offer this feature.
NEW & IMPROVED PUMP HEAD & TUBE DESIGN
- Easy Reorder: Tube assemblies are now stamped with the simple reorder number
- Increased Performance: Circumference of new pump head is more accurate, allowing for more accurate feed rats. Larger internal adapter ports will handle higher viscosity fluids
- Increased Strength: A strong pump head and adapter plate ensures adapters are secured in place. Tougher more durable tube adapters are manufactured of natural PVDF.
- Feed Rate: 32.6-326 mL/min
- RPM: 60
- Max PSI: 50
- Pump Tube Part Number: A1-3T
- Pump Tube Material: Tygothane
- Max Fluid Temperature: 130°F
- Ambient Temp. Range: 14° to 110°F
- Output Adjustment Range:
- 14 & 30 RPM with -1T, -2T tubes: 5-100% (20:1 turndown)
- All other models: 10-100% (10:1 turndown)
- Max Viscosity: 5,000 Centipoise
- Max. Suction Lift: 30 ft Water 0 psig
- Duty Cycle: Continuous
- Max. Solids: 50% by volume
- Amperage draw:
- 115V/60 Hz (A-100NFP = .513; A-100NVP = .350 amp max)
- 230V/60 Hz (A-100NFP = .563; A-100NVP = .173 amp max)
- 220V/50 Hz (A-100NFP = .660; A-100NVP = .175 amp max)
- 240V/50 Hz (A-100NFP = .585; A-100NVP = .193 amp max)
- Power cord plug type:
- 115V/60 Hz = NEMA 5/15 (USA)
- 230V/60 Hz = NEMA 5/15 (USA)
- 220V/50 Hz = CEE 7/VII (Europe)
- 240V/50 Hz = AS 3112 (Australia/New Zealand)
- Injection fitting O-Ring Seals: FKM and TFE/P (Optional EP)
- Product Dimensions:
- A-100NFP = 6" H x 9-3/8" W x 9-1/8" D
- A-100NVP = 6" H x 9-1/2" W x 9-1/8" D
- Approximate Shipping Weight: 12 lbs.
