- Use of ResinTech Premium Fine Mesh Carbon: Optimum mesh size provides more surface area to enhance organic adsorption and chlorine conversion
- Available in Acid Washed Carbon: Acid washing reduces carbon fines, prevents pH spiking, improves rinse up time and adds approximately 5% more capacity to carbon media
- Fits Standard Residential And Industrial Size Housing: AF Series cartridges are double open ended that fit standard residential and industrial housings
- Oversized Cartridge For Maximum Media Fill: AF series cartridges have up to 50% higher capacity and extend cartridge life, due to the use of larger cartridges
- Quality Produced And Made in The USA: To ensure consistent quality and peace of mind for the consumer all drinking water media are WQA Gold Seal or NSF certified. Cartridges are produce by Aries FilterWoks, a division of ResinTech. Strict quality control over all aspects of production allows complete traceability of every cartridge.
Applications:
- Residential Use : Carbon cartridges used as part of a water treatment system, improves water quality by removing harmful contaminants from municipal water supplies.
- Pretreatment To Reverse Osmosis (RO): Provides protection by removing contaminants such as chlorine and organics that can foul RO membranes
- Point-Of-Use (POU) Drinking Water Systems: Cartridge provides a source of clean water and is more cost effective than purchasing bottled water. It can be used as a standalone filter to reduce or eliminate: bad tastes and odors, chlorine and organic contaminants in municipal water supplies. The use of carbon cartridges significantly improves drinking water quality.
- Media: ResinTech Premium AGC40-CSAW/AGC50-CSAW Acid Washed Coconut Shell GAC
- Standard Housing Diameter x Length: 2.5" x 10"
- Flow Rate - Operating: 0.75 GPM
- Flow Rate - Maximum: 1.0 GPM
- Total Capacity (Gallons): 4,000
Technical Data:
- Diameter: 3.0"
- Length: 9.9"
- Min Temperature: 40°F
- Max Temperature: 100°F
- Min Pressure: 20 psi
- Max Pressure: 125 psi
- Micron Rating: 25
Materials of Construction
- Gasket: Thermoplastic Elastomer
- Cap: Polypropylene
- Pad: Polyester
- Body/Tube: Polypropylene